Dyson Fan Has A Burning Smell – Why And What To Do?

Dyson Fan Has A Burning Smell – Why And What To Do?

Temperature fluctuations can be harmful to one’s health. It’s useful to have a way to regulate the temperature at home. A Dyson fan can also be used to circulate air, but what if the Dyson fan is on fire? We’ve handled it, so you don’t have to!

If your Dyson fan smells like it’s on fire, it’s most likely due to overstress, which can cause a circuit malfunction. The smell of a Dyson fan is like burnt rubber or plastic. If this is the case, your device may be overheating. A blockage of the circulatory system is another cause of the odor. If you do not clean your Dyson fan regularly, dirt will accumulate and cause clogging.

Because prevention is always preferable to cure, keep reading to find out why your Dyson fan smells like it’s on fire. It also tells you what you should do. Let’s get this party started!

Why Does My Dyson Fan Have A Burning Smell?

Unlike traditional fans with grills and blades, a Dyson fan is bladeless, making it safer for children. A fine, steady air stream is released from an oval or ring-shaped opening.

It does not lower the room’s temperature but assists in air circulation within that area. Even without the typical characteristics of a pedestal fan, Dyson fans can experience the same issues as regular fans.

Best Seller
Glade PlugIns Refills Air Freshener, Scented and Essential
Glade PlugIns Refills Air Freshener, 

Oils for Home and Bathroom, Hawaiian Breeze, 6.7 Fl Oz, 10 Count

Best Seller
Air Freshener, Essential Oils, Eco Friendly Pack
Air Wick Plug in Scented Oil Refill, 10ct, Fresh Linen, 

Air Freshener, Essential Oils, Eco Friendly Pack

Best Seller
Essential Oils for Home and Bathroom, Cashmere Woods, 3.35 Fl Oz
Glade PlugIns Refills Air Freshener, Scented

Essential Oils for Home and Bathroom, Cashmere Woods, 3.35 Fl Oz

Best Seller
Scented Oil for Home and Bathroom, Hawaiian Breeze, 0.67 Fl Oz
Glade PlugIns Refills Air Freshener Starter Kit,

Scented Oil for Home and Bathroom, Hawaiian Breeze, 0.67 Fl Oz

Best Seller
Lavender & Chamomile, Air Freshener, Essential Oils
Air Wick Plug in Scented Oil Starter Kit

Lavender & Chamomile, Air Freshener, Essential Oils


The Equipment Is Overheating:

  • Dyson fans, like other devices, tend to overheat when used frequently.
  • Overloading a Dyson fan can cause damage to the motor system cables, as well as the internal gears and blades.
  • Overheating is prevented by leaving the device unused for more than 9 hours and 12 hours. This cycle can be repeated indefinitely to avoid overheating.
  • Overheating can result in system failures and electrical shorts in devices. Internally, high temperatures can burn thin cables and cause serious internal damage.
  • Keep your Dyson fan from overheating to avoid internal damage. If left unchecked for internal damage, it can cause a fire. Maintain your Dyson fan by inspecting it regularly and adhering to a specific usage cycle.
  • You can also benefit from Dyson’s professional support to its customers.
  • Dyson fans are designed to shut down automatically if they overheat, but checking your device regularly is a good idea.

Also check: Carrier Furnace Ignition Lockout – What to Do?

The Device is Clogged:

Another reason your Dyson fan may emit a burning odor is that the unit is clogged. The Air Filtration Function distinguishes Dyson fans from standard fans. While circulating airflow, it collects dust and debris.

If you do not clean your Dyson fan regularly, it may develop blockages inside the machine. A clogged machine can cause serious internal issues, such as engine parts running too hard or the machine not working properly. You can remove the clog by cleaning your Dyson fan. If you don’t know how to do the following:

1. Disconnect The Device:

Unplugging the device before cleaning the Dyson fan will save you from severe electrical accidents. Aside from that, it will allow you to pass the device around and make it easier.

2. Wipe Down The Fan With A Damp Cloth:

After unplugging your Dyson fan, take a damp cloth and lightly wipe the fan’s oval or ring. Because Dyson fans no longer have blades or grids that are difficult to clean, you can quickly wipe the fabric at the outside elements of the fan.

This procedure will no longer take as long. You can also use toddler wipes to clean the fan’s outer facets.

3. Clean the Back Vents:

Begin by looking for round grooves on the back of the tool. These are the vents on the fan. Because most dirt and dust get caught on this part, you must use a vacuum to remove all the dirt and dust clogging the vents.

Connect a smaller tube to your vacuum and paint until the vents are easy to reach.

4. Clean The Inside of The Fan:

Hold the fan’s upper and lower elements and twist them counterclockwise until they loosen. Separate the parts carefully to reveal the fan’s mechanical components.

Using a paper towel, wipe away the dirt. You can use a humid fabric or moist wipes to ease the relaxation of the internal part of the fan until all of the dust particles have been removed.

5. Replace The Fan:

After ensuring that the inside of the fan is dust-free, you must wait for the other components to dry before reassembling it. Connect the fan’s upper and lower elements and lightly twist it clockwise until it’s far securely attached.

Electrical Problems:

Electrical problems within the fan can cause a burning odor. Heat and a distinct burning odor can be produced by faulty wiring or loose connections.

Unplug the fan and turn it off, then carefully inspect the power cord for any visible damage or loose connections. If you notice any problems, replace the cord or have it repaired by a qualified electrician to avoid electrical hazards.

Wear And Tear On Mechanical Components:

Internal components of your Dyson fan may experience wear and tear if it has been in use for an extended period of time. This can cause friction within the motor, resulting in a burning odor.

If mechanical wear and tear is suspected, contact Dyson customer service or a certified technician for a professional evaluation and possible repairs.

Why is My Dyson Fan Constantly Turning Off?

If the selected temperature falls below room temperature, Dyson’s fan will turn off automatically.

This problem can be solved by selecting a temperature higher than the target temperature. The device has an LED display that shows the desired temperature.

Another reason the fan shuts down is that the device requires cleaning. After cleaning all the dirt off the fan, plug it back in and see if the device doesn’t shut down. If you set a temperature target and clean it, but the device still turns off, it could be due to a faulty mechanical component such as Loose screws or a faulty motor.

If you continue to use your device, Dyson fans may turn off automatically. Use your Dyson fan sparingly and regularly maintain it. Finally, Dyson’s fan filter needs to be replaced, or the unit may continue to shut down. We recommend that you replace the filter once a year.

Do Dyson Fans Work?

They do, indeed. Dyson fans are advertised as bladeless, but like other oscillating fans, they have blades hidden inside the stand. It vibrates like a standard fan. The device has a setting that lets you choose whether or not the fan spins. Press the swing button to start the fan spinning. Restart your Dyson fan if it is not spinning. Choose the wind speed and press the vibrate button once more.

How do I keep My Dyson Fan Cool?

Dyson fans function as both heaters and coolers. There is no cooling function, but circulating air lowers the room temperature. Please press the “cooling mode” button to cool the fan automatically— if it switches from heating to cooling mode.

Also check: What Type of Water You Should Use In a Humidifier?

Final Thoughts:

Like any other appliance or machine, Dyson fans require regular maintenance to avoid damage. If your Dyson fan emits a burning odor, it indicates that it needs to be serviced. To avoid serious problems in the future, do not ignore such warning signs. Don’t forget to take care of your Dyson fan as well.


About Author

Gulzar Abid

Gulzar Abid

Gulzar Abid is a passionate entrepreneur with a thirst for knowledge and yearns to help empower people to initiate their journey of growth and success. Chief Executive Officer K2 Groups Chief Executive Officer K2 Heating & Air Conditioning

Recent Posts

The Best Basic Home Tools kits


Stay updated on HVAC insights. Subscribe now!