How To Remove Access Panel On Carrier Furnace

How To Remove Access Panel On Carrier Furnace

The carrier furnace’s maintenance or spot checks begin with secure access to the control panel door. But how do you get rid of the access panels and doors? You’re nearly there! We discovered the answer below after conducting extensive research on the access panel.

In general, it is always dependent on the carrier furnace system model. Some carrier furnace access panels may be secured to the enclosure with screws. In either case, most access panels can be easily removed by sliding them forward gently. Before touching the furnace, turn off the power box.

Also check: How To Insulate Fireplace Not In Use

Isn’t it simple? There is a lot of important information for you to discover below, so keep reading. We’ll show you how to locate and remove the Carrier Furnace filter. Expect to see simple instructions for cleaning the filter and resetting the furnace unit. With that in mind, let’s get started!

What Happened to The Carrier Furnace Filters?

Aside from the main access panel, most carrier furnaces locate the air filter near the fan cabinet. This, of course, depends on the type of furnace you use. Depending on the position of the air handling unit, the filters are arranged vertically or horizontally. Sometimes, a filter can be found on the blower box, especially on older models.

How Do I Get The Carrier Furnace Filter Out?

  1. Regular air filter maintenance is critical to your transport furnace’s overall efficiency. You don’t want to compromise heating performance simply because you don’t know how to remove the filter.
  2. Regular air filter maintenance is critical to your shipping furnace’s overall efficiency. You don’t want to compromise heating performance simply because you don’t know how to remove the filter.
  3. Follow the simple steps below to remove the furnace filter safely. First, turn off the power to the furnace unit.
  4. Remove the panel or door from the fan compartment. If necessary, some screws may need to be loosened.
  5. Pull the old filter out of the housing by pushing it firmly.
  6. Replace the air filter with the new one. Align with the arrow’s position.
  7. Gently reinstall the access panel in the cabinet.
  8. Switch the furnace unit’s power to “ON.”

You may need to repeat this process every 2-3 months.

How Should The Washable Furnace Filter Be Cleaned?

Every system component, including filters, serves a purpose. It, like any other component of your furnace, requires routine maintenance. It’s too easy to disregard the furnace filter until there’s a problem. Finally, cleaning washable furnace filters should always be a top priority.

To Properly Clean Your Furnace Filter, Follow The Cleaning Steps Outlined Below:

  1. First, turn off the furnace and all thermostats.
  2. Remove the furnace filter as described above.
  3. After removing the filter, determine the best location for cleaning it.
  4. Once everything is in place, spray the filter with your garden hose. Spray water on the other side of the filter and use a microfiber cloth to remove any remaining dirt.
  5. Turn the filter on its side for a few minutes to drain the excess water.
  6. Once the filter is completely dry, slide it back into the mounting housing in the direction of the airflow arrows.
  7. Reconnect the furnace system’s power and reset the thermostat to your preference.

Is It Possible For Me To Reset The Furnace Unit Myself?

If you don’t know, the reset procedure should be performed after any furnace unit maintenance or inspection. You can perform the reset procedure independently without fear of taking a long time.

Furthermore, you need not purchase expensive tools or equipment to reset your furnace. As a result, this should be done quickly and easily. Please guide me through the process of resetting the carrier furnace unit.

The flameout safety mechanism is built into the carrier furnace system. Its function is to monitor the system’s operation and immediately alert if there is a problem with the furnace.

As a result, resetting the furnace is the only way to get it working properly again. Before you can reset the furnace, you must first locate the reset button. This red switch is usually found close to the burner.

How to Reset Your Carrier Furnace?

  • Once again, turn the furnace unit’s control box to “off.”
  • Connect the furnace unit to “OFF” and the main gas supply.
  • To remove the burner access door, gently slide it forward.
  • Locate and press the flame rollout button. Hold on until you hear a sound.
  • Allow the furnace system approximately 30 minutes to complete the desired conversion.
  • Replace the access door and turn on the electrical box safely.
  • Don’t forget to turn the furnace’s gas supply to “ON.” This may appear insignificant, but it is easily overlooked.

Cleaning The Carrier Furnace Blower:

Knowing how to clean your furnace fan properly is critical to improving the performance of your heating and central air conditioning. To move air into and out of the system, both devices use the same blower/fan.

You can begin disassembling the blower components if you have the necessary knowledge. This is commonly referred to as a “squirrel cage” and facilitates inspection and cleaning maintenance. You can also use a vacuum cleaner or a soft brush to clean the impeller. However, avoid bending the fins or applying too much pressure to them. This is done to avoid wheel or vane alignment damage.

How Do You Clean The Flame Sensor And Coils On A Carrier Furnace?

A flame sensor is required for the furnace unit to operate safely. On top of the burner assembly, it appears to be a metal bar. A clogged flame sensor can cause problems with furnace operation.

Remove the frame monitor from the burner assembly with care for proper cleaning. To clean the sensor, lightly wipe the reed’s surface with sandpaper. On the other hand, cleaning the furnace coil refers to cleaning the evaporator coil. The furnace cabinet heat pump or central air conditioning system relies heavily on the evaporator coil.

You can use a leave-in coil cleaner and a gentle brush to remove excess dirt. Cleaning helps to maintain energy efficiency and cooling or heating performance.

Also check: AC Thermostat Keeps Resetting To 85—What to Do?


Because the most critical components of a carrier furnace unit are frequently located on or within a cabinet, knowing how to safely remove a carrier furnace access panel is a good start when performing maintenance procedures. Maintaining your furnace’s critical components will improve or improve overall heating performance. We hope this vital information assists you in avoiding premature system failures in your furnace.


About Author

Mobeen Shahid

Mobeen Shahid

Mobeen Shahid is a Mechanical Engineer with two years of experience in the HVAC industry. His passion is analyzing HVAC issues, and he works relentlessly to devise customized solutions. He has been in the industry long enough to know the ins and outs and ensures that areas are optimally heated, cooled, and ventilated.

Recent Posts

The Best Basic Home Tools kits


Stay updated on HVAC insights. Subscribe now!